User-Defined Impedance Masks - Teledyne T3SP Series Operator's Manual

Open the Impedance Measurement Properties Window by right-
clicking one of the selected rows and pressing Properties.
Press the Open Template button and select the itx file with the
pre-definitions.
Press the Apply to Selection button.

5.1.4 User-defined Impedance Masks

Figure 7: User-defined (segmented) tolerance mask
The software supports user-defined (also called segmented) impedance masks
as shown in Fig. 7). Masks can be
•
defined manually by clicking the button Edit segmented Mask Values,
•
loaded from an xml definition file by clicking button Load segmented
T3SP-Series Operator's Manual
54
931776 RevE