Setup-Alarm Menu; Config Menu; Table 7-7: Alarm Configuration Settings - Teledyne 465M User Manual

7.2.6.

SETUP-ALARM Menu

The ALARM menu allows the operator to view and edit properties of the concentration
alarms. The table below summarizes the alarm configuration settings.
Property Meaning
HI ALARM HI alarm trigger value
HIHI ALARM HI-HI alarm trigger value
ON/OFF HI HI alarm enable, enables HI alarm
ALARM operation
ON/OFF HI HI HI-HI alarm enable, enables HI-HI
ALARM alarm operation
7.2.7.

CONFIG Menu

The CONFIG menu displays important information about the instrument. The Serial
Number, COMM address settings, and the latest revision of software installed are
information available in the CONFIG menu. Settings can be changed under other menus
(see Sections 7.2.3, 7.2.5, and 7.2.6); however the CONFIG menu just contains
instrument-specific information.
06160J DCN7969

Table 7-7: Alarm Configuration Settings

Teledyne API Model 465M O
Default Range
Value
10 PPM 10 - 9999
PPM
20 PPM 10 - 9999
PPM
ON ON/OFF
ON ON/OFF
Monitor User Manual
3
41