GEARSHIFT LINKAGE/TRANSMISSION
Remove the C1 gear (front end gear) to avoid inter-
ference with the crankcase.
Remove the countershaft assembly out of the
crankcase.
Remove the front side bearing and oil pass plate.
Disassemble the countershaft.
Clean all disassembled parts in solvent thoroughly.
LEFT CRANKCASE
MAINSHAFT:
Remove the following:
– two bolts
– mainshaft setting plate
– mainshaft assembly
– dowel pin
Disassemble the mainshaft.
Clean all disassembled parts in solvent thoroughly.
Check the needle bearing for abnormal wear or
damage.
10-28
1 GEAR
OUNTERSHAFT
ASSEMBLY
EARING
OIL PASS PLATE
OLTS
SETTING PLATE