Gearshift Linkage Assembly - Honda GL1800 Service Manual

GEARSHIFT LINKAGE/TRANSMISSION
– shift drum cam (lift stopper arm with a
screwdriver)
– dowel pin
– pivot bolt
– stopper arm
– return spring
– washer
ASSEMBLY
Install the return spring onto the crankcase as
shown.
Install the washer (between the arm and crankcase)
PRING
and stopper arm with the bolt.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
WA HER
TOPPER ARM
BOLT
Install the dowel pin into the shift drum.
DOWEL PIN
Lift the stopper arm with a screwdriver and install
the shift drum cam by aligning the pin groove with
the dowel pin.
lign
SHIFT DRUM C M
Install the four dowel pins into the shift drum cam.
Apply locking agent to the threads of the shift drum
joint bolt.
Install the shift drum joint by aligning the holes with
the dowel pins.
Install the bolt and tighten it.
TORQUE: 27 N·m (2.8 kgf·m, 20 lbf·ft)
Check the gearshift linkage operation and shift the
transmission into neutral.
10-9