Honda GL1800 Service Manual page 693

CRUISE CONTROL SYSTEM
Terminal No. &
Circuit
2 Gear position Green/orange and
switch ground
(Overdrive)
3 Gear position Red/white and
switch (4th) ground
4 Clutch cruise Green/blue (+) and
cancel switch ground (–)
5 "RESUME/ White/blue (+) and
ACCEL " switch ground (–)
6 "SET/DECEL " White/yellow (+) and
switch ground (–)
7 Speed sensor White/black (+) and
ground (–)
9 Cruise main Black/yellow (+) and
switch ground (–)
13 CRUISE ON Blue/orange
indicator
14 Cruise power Black/yellow (+) and
input ground (–)
20 Ground Green and ground
21 Engine speed Yellow/green (+) and
pulse ground (–)
26 CRUISE SET Blue/white
indicator
30 Cruise actua- Brown/black and
tor clutch ground
31 Cruise cancel Brown/red (+) and
switch ground (–)
32 Cruise actua- Brown/white (+) and
tor relay out- ground (–)
put
33 Cruise actua- Blue and No. 32
tor motor A Brown/white
21-10
Wire Color &
Connection
Transmission shifted into the
overdrive gear
Transmission shifted into any gear
except overdrive gear
Transmission shifted into 4th gear
Transmission shifted into any gear
except 4th gear
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
Clutch lever squeezed
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
Clutch lever free
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
"RESUME/ACCEL " switch pushed
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
"RESUME/ACCEL " switch free
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
"SET/DECEL " switch pushed
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
"SET/DECEL " switch free
Ignition switch turned to "ON"
Rear wheel turned slowly
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
Ground wire with a jumper wire and
turn the ignition switch to "ON. "
Ignition switch turned to "ON"
Crank the engine with the starter
motor.
Ground it with a jumper wire and turn
the ignition switch to "ON. "
Connect the 12-V battery (+) to Brown/
black and (–) to ground.
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
Brake lever and pedal free
Ignition switch turned to "ON"
Cruise main switch turned to "ON"
Brake lever squeezed or brake pedal
depressed
Ignition switch turned to "ON"
Ground the No. 50 Green/black with a
jumper wire and turn ignition switch
to "ON. "
Conditions
–
–
–
Specification
There should be continuity.
There should be no
continuity.
There should be continuity.
There should be no
continuity.
There should be battery
voltage.
There should be no voltage.
There should be battery
voltage.
There should be no voltage.
There should be battery
voltage.
There should be no voltage.
0 to 5 V pulse voltage
should appear.
There should be battery
voltage.
CRUISE ON indicator
should come on.
There should be battery
voltage.
There should be continuity.
* There should be 10.5 V or
more.
CRUISE SET indicator
should come on.
There should be 35 – 45Ω.
Actuator clutch should click.
There should be battery
voltage.
There should be no voltage.
There should be no voltage.
There should be battery
voltage.
There should be 3 – 7Ω.