Left Crankcase Cover Installation; Flywheel Installation - Honda CRF450X 2005 Service Manual

ALTERNATOR
Remove the woodruff key.
INSTALLATION
Wipe any oil off the mating surface of the flywheel.
Install the woodruff key into the crankshaft groove.
Install the flywheel to the crankshaft by aligning the
~;;;;~
groove in the flywheel with the woodruff key.
Apply oil to the flywheel nut threads and seating
surface.
Install the washer and nut.
Hold the flywheel with the special tool and tighten
the nut to the specified torque.
TOOL:
Flywheel holder 07725·0040001 or
07AMB· KRNA100
TORQUE: 64 N'm (6.5 kgf·m, 47 IbUt)
Install the left crankcase cover (page 12-6),
LEFT CRANKCASE COVER
INSTALLATION
12-6
Install a new gasket and dowel pins.
Apply oil to the engine oil drain bolt threads and
'~~~~;~~~E~~ii~ii~~~
seating surface.
Inst all the left crankcase cover and bolts.
Tighten the left crankcase cover bolts in the order as
shown in the illustration.
• First tighten the No.1 bolt temporarily.
• Tighten the No.2 - No.9 bolts securely.
• Tighten the engine oil drain bolt (No.10) to the
specified t orque with a new sealing washer.
TORQUE: 16 N 'm {1.6 kgf·m, 12 Ibf·ftj