Oil Pump Disassembly - Honda GL1800 Service Manual

LUBRICATION SYSTEM
Remove the three mounting bolts and oil pump
from the crankcase.
Remove the three dowel pins and two O-rings.
DISASSEMBLY
Remove the three oil pump assembly bolts and oil
pump cover B.
Remove the dowel pins from the oil pump body.
SCAVENGE PUMP SIDE:
Remove the drive pin from the oil pump shaft.
Remove outer rotor B and inner rotor B from oil
pump cover B.
Remove the oil seal from oil pump cover B to avoid
damaging the cover.
4-8
IL PUMP
D WEL PINS
DRIVE PIN
R T RS
IL PUMP C VER B
IL PUMP C VER B