Left Crankcase Cover - Honda CBR125R Owner's Manual

ALTERNATOR/STARTER CLUTCH

LEFT CRANKCASE COVER

REMOVAL
Remove the lower cowl (page 2-8).
Remove the bolts and drive sprocket cover.
Disconnect the alternator/CKP sensor 6P (Natural)
connector.
Release the alternator/CKP sensor wire from the
clamp.
Loosen the left crankcase cover bolts in a crisscross
The left crankcase
pattern in 2 or 3 steps and remove the bolts, washer
cover (stater) is
and left crankcase cover.
magnetically
attracted to the
flywheel, be careful
during removal.
Remove the dowel pins and gasket.
11-4
COVER
6P (NATURAL) CONNECTOR
BOLT/WASHER
BOLTS
GASKET
BOLTS
CLAMP
COVER
DOWEL PINS