Output Shaft Assembly - Honda GL1800 Service Manual

GEARSHIFT LINKAGE/TRANSMISSION
– thrust washer
– damper lifter
SPRING
– damper spring
– reverse driven gear
LIFTER
ASHER
REVERSE DRIVEN GEAR
Check the damper lifter for wear or damage.
Measure the damper spring free length.
SERVICE LIMIT: 64.0 mm (2.52 in)
AMPER SPRING
AMPER LIFTER
Check the output shaft, gear bushing and final
driven gear for abnormal wear or damage.
Measure the driven gear I.D.
SERVICE LIMIT: 26.03 mm (1.025 in)
Measure the bushing O.D. and I.D.
SERVICE LIMIT: O.D.: 25.95 mm (1.022 in)
I.D.: 22.05 mm (0.868 in)
Measure the shaft O.D.
SERVICE LIMIT: 21.99 mm (0.866 in)

OUTPUT SHAFT ASSEMBLY

DAMPER LIFTER
DAMPER SPRING
C TTERS
WASHER
RETAINER
SNAP RING
BEARING
UTPUT SHAFT
BUSHING
FINAL DRIVEN GEAR
REVERSE DRIVEN GEAR
10-17