FUEL SYSTEM (Programmed Fuel Injection)
If the pressure is lower than specified pressure,
inspect the following:
– clogged fuel filter
– pressure regulator
– fuel pump (page 5-54)
After inspection, remove the fuel pressure gauge.
EALING WA HER
Install the sealing bolt with a new sealing washer
and tighten it.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
EALING BOLT
ACUUM HOSE
Turn the ignition switch to "ON" and check that
there is no fuel leakage.
Remove the hose clamp from the pressure regulator
vacuum hose.
HOSE CLAMP
OLTS
Install the left injector cover and tighten the two
bolts securely.
Install the front fairing (page 2-10).
INJECTOR COVER
5-53