Rear Brake Caliper Assembly - Honda GL1800 Service Manual

BRAKE SYSTEM (Standard)
Measure the caliper piston O.D.
SERVICE LIMITS: Upper/lower: 22.56 mm (0.888 in)
ASSEMBLY
PAD PIN
PAD PIN PLUG
RACKET PIN OOT
Coat new piston and dust seals with clean brake
fluid and install them in the seal grooves in the
caliper.
Coat the caliper pistons with clean brake fluid and
install them into the caliper cylinders with the open-
ing toward the pads.
15-36
Center: 26.91 mm (1.059 in)
RAKE PADS
PISTON SEALS
PAD SPRING
PISTON (22 mm O.D.)
DUST SEALS
CALIPER PIN OOT
ISTONS
PISTON (27 mm O.D.)
PISTON (22 mm O.D.)
PAD RETAINER
CALIPER RACKET
SEALS