ENGINE REMOVAL/INSTALLATION
KNOCK SENSOR
Disconnect the connectors from both knock sensors.
Disconnect connectors from both horns.
ORN
EVAP CANISTER BRACKET
Disconnect the No. 1 and No. 4 hoses from the
EVAP canister.
Remove the wire band.
Remove the two bolts, EVAP canister bracket and
coolant drain joint from the engine.
IRE BAND
Drain the clutch fluid from the hydraulic system
(page 9-7).
Remove the clutch slave cylinder oil bolt and seal-
ing washers.
IL B LT AND SEALING WASHERS
IVOT BOLT AND WASHER
Remove the gearshift pedal pivot bolt and washer.
Remove the pinch bolt and gearshift pedal/arm
from the gearshift spindle.
INCH BOLT
7-7