Gear Position Switch Inspection; Gear Position Switch Replacement - Honda GL1800 Service Manual

LIGHTS/METERS/SWITCHES
GEAR POSITION SWITCH
INSPECTION
Remove the air cleaner housing (page 5-65).
Disconnect the gear position switch connector.
Check for continuity at the switch side connector
terminals.
There should be continuity in each gear position as
follows:
GEAR POSITION
Neutral
1st
2nd
3rd
4th
Overdrive
REPLACEMENT
Remove the air cleaner housing (page 5-65).
Disconnect the gear position switch connector.
Remove the gear position switch from the gearshift
linkage cover (page 10-8).
Install a new gear position switch onto the gearshift
linkage cover and install the cover (page 10-9).
Connect the gear position switch connector.
Install the air cleaner housing (page 5-65).
20-38
CONTINUITY
Light green/red to ground
–
Black/yellow to ground
White/red to ground
Red/white to ground
Green/orange to ground
EAR POSITION SWITCH CONNECTOR
Light green/red
Black/yellow
Green/orange
Red/white
WITCH IDE CONNECTOR
(viewed from the terminal side)
EAR POSITION SWITCH CONNECTOR
White/red