Honda GL1800 Service Manual page 300

– pressure plate from clutch center
– O-ring
– clutch piston from pressure plate
– O-ring
– '01 – '03:
three clutch discs C, four clutch discs A and six
clutch plates
After '03:
clutch disc C, six clutch discs A and six clutch
plates
While pressing the clutch plate, push the clip wire
ends from the inside of the clutch center to remove
them off the wire hole in the clutch center.
Continuously press the clutch plate and remove the
clip wire from the clip groove in the clutch center.
Remove the following:
– clutch plate
– clutch disc B
– judder spring
– spring seat
PRESSURE
PLATE
LUT H
PISTON
DISCS AND PLATES
WIRE ENDS
LATE
JU ER SPRING AN
ISC B
SPRING SEAT
CLUTCH
O-RING
CLI WIRE
9-17