Honda GL1800 Service Manual page 408

FRONT WHEEL/SUSPENSION/STEERING
+4-9
Remove the two screws from the right handlebar
switch.
CREW
Remove the screw, and setting plate from the right
handlebar switch.
PLATE
HRO LE CABLES
Remove the throttle grip from the right handlebar
and disconnect the throttle cables from the throttle
grip flange.
Remove the throttle grip from the throttle pipe.
HRO LE GRIP
RIGHT HANDLEBAR INSTALLATION
Clean the inside surface of the throttle grip and the
outside surface of the throttle pipe.
Apply Honda Bond A or equivalent to the inside sur-
face of the throttle grip and to the outside surface of
HRO LE GRIP
the throttle pipe.
Wait 3 – 5 minutes and install the grip.
Rotate the grip for even application of the adhesive.
Allow the adhesive
to dry for 1 hour
before using.
13-13