SIDE COVER
Remove the side cover by releasing the four bosses
from the grommets.
Install the side cover in the reverse order of
Be careful not to
removal.
dislodge the
grommets.
ENGINE SIDE COVER
Release the two bosses from the grommets, free the
front portion from the tab of the injector cover and
remove the engine side cover.
Install the engine side cover from the lower side
Apply soapy water
while aligning the slot with the tab of the injector
to the tab for easy
cover, and insert the bosses into the grommets
installation. Be
properly.
careful not to
dislodge the
grommets.
SEAT
Remove the four bolts and passenger grips.
Raise the rear of the seat and remove the seat by
sliding it rearward.
Install the seat while inserting the tabs under the top
shelter, and the prong under the shelter setting stay.
Push down the rear of the seat, install the passenger
grips and tighten the four bolts securely.
HELTER ETTING TAY
FRAME/BODY PANELS/EXHAUST SYSTEM
ROMMETS
EAT
ROMMETS
BOSSES
SIDE COVER
TAB
EN INE SIDE COVER
BOSSES
PA ENGER
GRIP
BOLT
PRONG
2-5