REAR WHEEL/SUSPENSION
Install the shock link onto the frame by inserting the
mounting bolts from the left side.
Install the mounting nuts and tighten the nuts to the
specified torque.
TORQUE:
Shock arm-to-frame nut:
Shock arm-to-shock link nut:
Install the rear wheel (page 14-16).
Install the exhaust system (page 2-20).
SWINGARM
REMOVAL
Remove the final gear case (page 12-10).
Remove the shock absorber (page 14-16).
Remove the mounting bolts and each swingarm
pivot bolt cover.
Remove the bolt and brake pipe clamp.
Remove the left pivot lock nut with the special tool.
TOOL:
Lock nut wrench, 10 x 44/6 x 46 mm
14-22
64 N·m (6.5 kgf·m, 47 lbf·ft)
64 N·m (6.5 kgf·m, 47 lbf·ft)
07ZMA-MCAA101
UTS A D BOLTS
PIVOT OLT COVER
BOLT
OCK NUT
OCK NUT WRENCH
OLTS
I E CLAM