Honda GL1800 Service Manual page 514

BRAKE SYSTEM (Standard)
Assemble the caliper body halves with new assem-
bly bolts and tighten them.
TORQUE: 32 N·m (3.3 kgf·m, 24 lbf·ft)
Install the pad spring onto the caliper body properly
as shown.
AD S RING
Check the caliper and bracket pin boots and replace
them if they are hard, deteriorated or damaged. RACKET
Install the boots into the caliper and bracket.
OOT
Apply silicone grease to the inside of the boots and
install the caliper bracket over the caliper body.
Install the brake pads (page 15-13).
OOT
Install the brake caliper so the disc is positioned
between the pads, being careful not to damage the
ALIPER
pads.
Install new mounting bolts and tighten them.
TORQUE: 45 N·m (4.6 kgf·m, 33 lbf·ft)
15-37