BRAKE SYSTEM (Standard)
DISASSEMBLY
Remove the following from the master cylinder:
– cotter pin
– joint pin
– pivot arm
– boot (from the master cylinder)
– snap ring
TOOL:
Snap ring pliers
– piston/push rod assembly
– primary cup
– spring
Clean the master cylinder and master piston in
clean brake fluid.
INSPECTION
Check the piston cups and boot for wear, deteriora-
tion or damage.
Check the spring for damage.
Check the master cylinder and piston for scoring,
scratches or damage.
Measure the master cylinder I.D.
SERVICE LIMIT: 17.515 mm (0.6896 in)
Measure the master piston O.D.
SERVICE LIMIT: 17.405 mm (0.6852 in)
15-20
07914-SA50001
OTTER PIN
JOINT PIN
PIVOT ARM
PRING
CUP
PI TON