– left cam chain tensioner with two bolts
– right cam chain tensioner with washer (between
crankcase and tensioner), pivot collar and bolt
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
– ignition pulse generator rotor (align the groove
with the key)
– washer and bolt (apply engine oil to the threads
and seating surface)
TORQUE: 59 N·m (6.0 kgf·m, 43 lbf·ft)
Clean the gasket mating surfaces of the crankcase
and cover thoroughly, being careful not to damage
them.
Install the following onto the crankcase cover:
– ignition pulse generator
– two bolts with retainer (apply locking agent to
the threads)
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
– grommet
Apply liquid sealant to the mating areas of the
crankcase as shown.
CYLINDER HEAD/VALVE
GN T ON PULSE
GENERATOR
GROMMET
RETA NER
8-27