ASSEMBLY
Apply molybdenum disulfide grease to the reverse
reduction gears.
Install the gear holder, aligning the groove with the
dowel pin.
Install a new seal ring.
Assemble the reduction gear cases, aligning the
groove with the dowel pin.
Install the three screws and tighten them securely.
Install the dowel pin and starter reduction gears,
aligning the groove in the large outer gear with the
pin.
Apply molybdenum disulfide grease to the starter
reduction gears.
STARTER/REVERSE SYSTEM
CREW
REDUCTION GEAR
DOWEL PIN
AND GROOVE
19-21