Honda GL1800 Service Manual page 244

11.Install the lock nut onto the left front engine
hanger adjusting bolt.
Hold the adjusting bolt and tighten the lock nut
using the special tool.
TOOL:
Lock nut wrench
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
12.Install and tighten the left rear engine hanger
bolt.
TORQUE: 64 N·m (6.5 kgf·m, 47 lbf·ft)
13.Install and tighten the left front engine hanger
bolt.
TORQUE: 64 N·m (6.5 kgf·m, 47 lbf·ft)
14.Install and tighten the left center engine hanger
bolt.
TORQUE: 39 N·m (4.0 kgf·m, 29 lbf·ft)
ENGINE REMOVAL/INSTALLATION
07908-ME90000 or
07GMA-KT7A200
(U.S.A. only)
EFT CENTER ENGINE HANGER BO T
7-15