Install the seven discs and six clutch plates alter-
nately, starting with the disc.
'01 – '03:
First, install four discs A, then three discs C; alter-
nating between discs and plates.
After '03:
First, install six discs A, then disc C; alternating
between discs and plates.
Coat a new O-ring with engine oil and install it into
the groove in the clutch center boss.
Install the pressure plate by aligning its convex
areas with the grooves in the clutch center.
Coat a new O-ring with engine oil and install it into
the groove in the clutch piston.
Install the clutch piston evenly until it is fully seated.
Install lifter plate B by aligning the tabs with the oil
holes in the pressure plate.
O-RING
PRESSURE PL TE
-RING
IFTER P ATE B
CLUTCH
DISCS
AND
PLATES
lign
CLUTCH
PIST N
TABS
HO ES
9-23