Remove the four bolts and control unit holder.
Disconnect the intake air temperature (IAT) sensor
connector.
Remove the seven screws and air cleaner cover.
Replace the air cleaner element in accordance with
the maintenance schedule or any time it is exces-
sively dirty or damaged.
Install a new air cleaner element and the cover.
Install the removed parts in the reverse order of
removal.
CRANKCASE BREATHER
• Service more frequently when ridden in rain, at
full throttle, or after the motorcycle is washed or
overturned. Service if the deposit level can be
seen in the transparent section of the drain hose.
Remove the five rubber plugs, five socket bolts and
left cylinder head side cover.
MAINTENANCE
CREW
CONNECTOR
IR CLE NER ELEMENT
LUGS/BOLTS
CYLINDER HEAD SIDE COVER
COVER
3-7