LUBRICATION SYSTEM
OIL STRAINER/PRESSURE RELIEF
VALVE
Separate the crankcase (page 11-6).
OIL STRAINER
Remove the strainer bolt and oil strainer from the
oil pump.
Remove the oil strainer packing.
Clean the oil strainer thoroughly.
Apply engine oil to the new packing and install it
onto the oil pump.
Apply locking agent to the oil strainer bolt threads.
Install the oil strainer onto the oil pump with the
strainer bolt.
Tighten the bolt to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
OIL PRESSURE RELIEF VALVE
Remove the oil pressure relief valve and O-ring.
4-6
ACKING