Honda GL1800 Service Manual page 414

Remove the three bolts and front pulser ring from
the right wheel hub.
Remove the six brake disc bolts and brake disc from
the right wheel hub.
Remove the six brake disc bolts and brake disc from
the left wheel hub.
Install the bearing remover head into the bearing.
Replace the wheel
From the opposite side of the wheel, install the
bearings in pairs.
bearing remover shaft and drive the bearing out of
Do not reuse old
the wheel hub.
bearings.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing remover shaft
Bearing remover head, 20 mm 07746-0050600
FRONT WHEEL/SUSPENSION/STEERING
RONT PULSER RING
RAKE DISCS
07746-0050100
EMOVE HEAD
OLTS
EMOVE SHAFT
BOLTS
13-19