TRUNK OPENER UNIT INSPECTION
Remove the trunk lower cover (page 2-14).
Disconnect the trunk opener unit 8P connector.
LOCK/UNLOCK ACTUATOR
Unlock the trunk opener unit with the ignition key.
Connect a 12-V battery (+) terminal to the Yellow
wire terminal and (–) terminal to the Red wire termi-
nal momentarily.
The trunk opener unit should be locked.
Connect a 12-V battery (+) terminal to the Red wire
terminal and (–) terminal to the Yellow wire terminal
momentarily.
The trunk opener unit should be unlocked.
LOCK/UNLOCK SWITCH
Check for continuity between the White and Green
wire terminals.
There should be continuity with the opener unit
locked, and no continuity with the unit unlocked.
Check for continuity between the Black and Green
wire terminals.
There should be continuity with the opener unit
unlocked, and no continuity with the unit locked.
TRUNK LID OPENER ACTUATOR
Close the trunk lid.
Connect a 12-V battery (+) terminal to the Blue wire
terminal and (–) terminal to the Green wire terminal
momentarily.
The trunk lid should open (pop up).
LIGHTS/METERS/SWITCHES
RUNK OPENER UNI CONNEC OR
PENER UNIT SIDE C NNECT R
(viewed from the terminal side)
Red
Yellow
PENER UNIT SIDE C NNECT R
(viewed from the terminal side)
Green
Black
PENER UNIT SIDE C NNECT R
(viewed from the terminal side)
Green
Blue
White
20-47