Honda GL1800 Service Manual page 344

Hide thumbs Also See for GL1800:

Table of Contents

GEARSHIFT LINKAGE/TRANSMISSION

Insert the countershaft assembly into the hole (bear-

ing support) in the crankcase and support it, being

careful not to damage the gear teeth.

Install the C1 gear onto the countershaft. Install the

countershaft assembly into the bearing in the

Support the countershaft assembly and install the

rear side bearing onto the countershaft and into the

Apply locking agent to the setting plate bolt threads.

Install the setting plate and tighten the three bolts.

TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)

ETTING PLATE

Troubleshooting