CLUTCH
CLUTCH OUTER
Check the slots in the clutch outer for nicks, indenta-
tions or abnormal wear made by the clutch discs.
CLUTCH OUTER REMOVAL
Remove the engine from the frame (section 7).
Unstake the clutch outer lock nut.
Be careful not to
damage the pri-
mary driven gear
boss threads.
Hold the clutch outer with the special tool and
loosen the clutch outer lock nut.
TOOLS:
Clutch outer holder
Lock nut wrench, 46 mm
Remove the lock nut.
Remove the special washer and clutch outer.
CLUTCH OUTER INSTALLATION
Clean the primary driven gear boss threads
thoroughly.
Apply molybdenum oil solution to the friction
spring (cone spring) on the reverse side of the
clutch outer.
Install the clutch outer and the special washer with
the "OUTSIDE" mark facing out.
9-20
LOCK N T
OUTER
HO DER
07JMB-MN50100
07JMA-MN50100
CLUTCH OUTER
WASHER
("OUTSIDE")
LUT H OUTER
nstake
OCK NUT
WRENCH