Right Handlebar Removal - Honda GL1800 Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Install the handlebar outer weight onto the inner
weight, aligning the bosses and grooves.
Install a new mounting screw and tighten it while
holding the weight.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Install the handlebar center cover (page 13-7).
Install the meter panel (page 2-7).

RIGHT HANDLEBAR REMOVAL

Remove the meter panel (page 2-7).
Remove the handlebar center cover (page 13-7).
Hold the handlebar weight and remove the mount-
ing screw and weight.
Remove the holder cap from the brake master cylin-
)2
der holder bolts.
Disconnect the brake light/cruise cancel switch
connectors.
Loosen the two brake master cylinder holder bolts,
but do not remove them.
OLTS
13-11