Honda GL1800 Service Manual page 410

Hide thumbs Also See for GL1800:

Table of Contents

FRONT WHEEL/SUSPENSION/STEERING

Install the handlebar setting plate and tighten the

Route the wires

and hose properly

(page 1-23).

Place the right handlebar onto the top bridge and

align the bolt holes securely. Then install the han-

dlebar mounting bolts and tighten them to the spec-

ified torque.

TORQUE: 26 N·m (2.7 kgf·m, 20 lbf·ft)

Securely clamp the throttle cables with the handle-

THROTTLE ABLES

Make sure the end of the master cylinder aligns with

the handlebar, and tighten the upper bolt first, then

the lower bolt.

TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)

light/cruise

Troubleshooting