Fairing Pocket; Left Fairing Pocket; Top Shelter - Honda GL1800 Service Manual

Disconnect the six headlight connectors.
Remove the two 5 x 19 mm, four 5 x 12 mm and two
6 mm setting bolts.
Remove the three flange bolts and collars and move
the front fairing forward.
Disconnect the bank angle sensor and open air tem-
perature sensor connectors, and remove the front
fairing.
Temporarily install the front fairing, and connect the
bank angle sensor and open air temperature sensor
connectors.
Install the front fairing while inserting the two
bosses into the grommets.
Install the removed parts in the reverse order of
removal.
FLANGE BOLTS
FRONT FAIRING

TOP SHELTER

FAIRING POCKET

LEFT FAIRING POCKET

Push the opener button and open the fairing pocket
lid.
Remove the four trim clips by pushing the center
pins in, and remove the fairing pocket.
FRAME/BODY PANELS/EXHAUST SYSTEM
SENSOR CONNECTORS
COLLARS
HEADLIGHT CONNECTORS
5 x 19 mm SETTING BOLTS
LEFT FAIRING POCKET
TRIM CLIPS
5 x 12 mm
SETTING
BOLTS
6 mm
SETTING
BOLTS
2-11