STARTER/REVERSE SYSTEM
– nut
– washer
– insulator washers
– O-ring
– cable terminal
– insulated brush
– insulator
REDUCTION GEAR CASE
Check the reverse drive gear for excessive or abnor-
mal wear.
Remove the snap ring and washers from the starter
shaft.
Remove the reduction gears and dowel pin.
Check the starter reduction gears for excessive or
abnormal wear.
Remove the three screws.
Separate the starter and reverse reduction gear
cases.
Remove the seal ring.
Remove the gear holder.
Check the reverse reduction gears for excessive or
abnormal wear.
19-20
CREW
REDUCTION GEAR
EAR HOLDER
REDUCTION EARS
DOWEL PIN
SEAL RIN