Meter Panel; Rearview Mirror - Honda GL1800 Service Manual

METER PANEL

Remove the speaker covers by releasing the four
tabs for each cover.
Remove the two trim clips and setting bolts.
Release the four bosses from the grommets, discon-
nect the multi-display control switch 4P connector
and remove the meter panel.
Install the meter panel by aligning the four pins with
the holes and the two tabs with the slots.
Install the removed parts in the reverse order of
Be careful not to
removal.
dislodge the
grommets.

REARVIEW MIRROR

Remove the meter panel.
Remove the mirror boot from the front fairing.
Remove the trim clip, screw and mirror cover.
Remove the three screws, bracket and mirror.
Disconnect the turn signal light 3P connector.
Install the rearview mirror in the reverse order of
Install the tabs and
removal.
hooks of the wind-
shield height lever
boot and mirror
boot properly.
HEIGHT LEVER
BOOT
GROMMETS
METER PANEL
4P CONNECTOR
TRIM CLIP
FRAME/BODY PANELS/EXHAUST SYSTEM
TRIM CLIPS
MIRROR
BOOT
SCREW
MIRROR COVER
SPEAKER COVERS
SETTING BOLTS
MIRROR
SCREWS
BRACKET
3P CONNECTOR
2-7