Rear Fender B - Honda GL1800 Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM

REAR FENDER B

Remove the left and right saddlebags (page 2-15).
Remove the following from the rear fender:
– two screws and relay box assembly
– starter relay switches A and B
– power control relays 1 and 2
– speed limiter relay
– reverse regulator assembly
– connector holder
– band and ABS control unit
Remove the four bolts, release the hooks and
remove rear fender B.
Installation is in the reverse order of removal.
CONNECTOR HOLDER
STARTER RELAY
SWITCHES
2-16
RELAYS
REVERSE REGULATOR
ASSEM LY
OLTS
RELAY OX ASSEM LY
A S CONTROL UNIT
REAR FENDER
OLTS