Rear Brake Caliper Inspection - Honda GL1800 Service Manual

BRAKE SYSTEM (Standard)
– assembly bolts
ODY A
– caliper body B
ODY
Place a shop towel over the pistons.
Position the caliper body with the pistons facing
down and apply small squirts of air pressure to the
fluid inlets to remove the pistons.
Push the dust and piston seals in and lift them out.
Clean the seal grooves, caliper cylinders and pis-
tons with clean brake fluid.
EAL
INSPECTION
Check the caliper cylinders and pistons for scoring,
scratches or damage.
Measure the caliper cylinder I.D.
SERVICE LIMITS: Upper/lower: 22.71 mm (0.894 in)
Center: 27.06 mm (1.065 in)
15-35