Connect the brake hose to the master cylinder with
the oil bolt and new sealing washers, and tighten
the oil bolt while holding the master cylinder firmly.
TORQUE: 34 N·m (3.5 kgf·m, 25 lbf·ft)
Install the master cylinder onto the fork leg with
new mounting bolts and tighten them.
TORQUE: 31 N·m (3.2 kgf·m, 23 lbf·ft)
Install the pivot collar into the caliper bracket.
Connect the master cylinder onto the caliper bracket
with a new bolt and tighten it.
TORQUE: 25 N·m (2.6 kgf·m, 19 lbf·ft)
Connect the brake hose to the master cylinder with
the oil bolt and new sealing washers, and tighten
the oil bolt.
TORQUE: 34 N·m (3.5 kgf·m, 25 lbf·ft)
Install front fender B (page 13-39).
Fill and bleed the pedal brake hydraulic system
(page 15-10).
FRONT BRAKE CALIPER
REMOVAL
Drain the brake fluid from the lever and pedal brake
hydraulic systems (page 15-6).
LEFT CALIPER
Remove the brake pads (page 15-13).
Disconnect the brake hoses from the brake caliper
by removing the oil bolts and sealing washers.
BRAKE SYSTEM (Standard)
SEALING
WASHERS
IL B LT
C LLAR
SEALING
M UNTING
WASHERS
B LTS
IL B LT
J INT
B LT
IL B LTS
15-27