Honda GL1800 Service Manual page 458

3. Memory Switch 1 and 2 Control Line Continuity
inspection
Check the following wires for continuity between
the panel switch 14P gray connector and combi-
nation meter 16P black connector.
– Brown/yellow
– Brown/blue
Is there continuity?
NO – Open circuit in the fairing sub-wire
harness.
YES – • Loose or poor contact of the switch
14P gray connector and meter 16P
black connector.
• Faulty combination meter; replace
the meter/gauge
(page 20-19).
REAR WHEEL/SUSPENSION
ETER 16P BLACK CONNECTOR
(viewed from the terminal side)
assembly
Br/W Lg/Y
14-13