Honda GL1800 Service Manual page 222

COOLING SYSTEM
Route the fan motor wire and condenser wire
AN MOTOR
through the shroud.
Install the fan motor onto the shroud with the drain
hose facing down as shown, then install the three
bolts and tighten them securely.
DRAIN HOSE BOLTS
OOLING FAN
Install the cooling fan onto the motor shaft, aligning
the flat surfaces.
Apply locking agent to the fan nut threads.
Install the nut and tighten it securely.
NUT
OLTS
Install the fan shroud/motor assembly and con-
denser, and tighten the three bolts securely.
CONDENSER
INSTALLATION
RIGHT RADIATOR
BOSS
Install the right radiator by inserting the boss into
the grommet in the stay.
ROMMET
6-13