Honda GL1800 Service Manual page 630

Hide thumbs Also See for GL1800:

Table of Contents

STARTER/REVERSE SYSTEM

Install the two dowel pins into the crankcase.

Install the starter drive gear holder and tighten the

three bolts securely.

SHIFTER GEAR

Apply oil to the needle bearings.

Apply molybdenum oil solution to the shifter guide

(holes), groove and shifter gear splines.

Install the washer, needle bearings, shifter gear and

washer onto the reverse shifter.

Install the snap ring with the chamfered side facing

Check that the shifter gear turns smoothly.

Troubleshooting