Front Turn Signal Light Bulb Replacement; Oil Pressure Switch Diode - Honda GL1800 Service Manual

OIL PRESSURE SWITCH DIODE

Remove the seat (page 2-5).
Remove the oil pressure switch diode from the wire
harness.
Check for continuity between the diode terminals.
When there is continuity, a small resistance value
will register.
If there is continuity in one direction, the diode is
normal.
FRONT TURN SIGNAL LIGHT
BULB REPLACEMENT
Remove the screw and mirror from the rearview
mirror housing by releasing the two tabs.
Remove the bulb socket from the turn signal light
by turning it counterclockwise.
Pull the bulb out of the socket and replace it with a
new one.
Install the removed parts in the reverse order of
removal.
REPLACEMENT
Remove the rearview mirror cover (page 2-7).
Disconnect the turn signal light connector.
Remove the mirror from the mirror housing.
Remove the three screws, base cover and turn sig-
nal light assembly.
LIGHTS/METERS/SWITCHES
TAB
MIRROR SCREW
BA E COVER
TURN IGNAL LIGHT
A EMBLY
CREW
20-13