Front Wheel Installation - Honda GL1800 Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Apply grease to new dust seal lips and install the
Do not get grease
dust seals until they are flush with the wheel hub.
on the brake discs
or stopping power
will be reduced.
INSTALLATION
Install the side collars.
Be careful not to
damage the wheel
speed sensor and
• The right side collar is longer than the left side
pulser ring.
collar.
Place the front wheel between the fork legs.
Insert the front axle from the left side until it is fully
seated.
Make sure the index line on the axle is aligned with
the fork leg.
Install the axle bolt and tighten it to the specified
torque while holding the axle.
TORQUE: 59 N·m (6.0 kgf·m, 43 lbf·ft)
Tighten the right axle holder bolts to the specified
torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
13-22
UST SEALS
IGHT AXLE HOLDE BOLTS
F ONT AXLE BOLT