LEFT CALIPER
ALIPER BRA KET
PAD RETAINER
BRA KET PIN BOOT
Coat new piston and dust seals with clean brake
fluid and install them into their correct seal grooves
in the caliper.
Coat the caliper pistons with clean brake fluid and
install them into their correct caliper cylinders with
the opening toward the pads.
Assemble the caliper body halves with new assem-
bly bolts and tighten them.
TORQUE: 32 N·m (3.3 kgf·m, 24 lbf·ft)
ALIPER PIN BOOT
PISTON (22 mm O.D.)
PISTON
(27 mm O.D.)
PISTON (22 mm O.D.)
BRAKE PADS
BRAKE SYSTEM (Standard)
PAD SPRING
DUST SEALS
PISTON SEALS
Left caliper shown:
ISTONS
PAD PIN
PAD PIN
PLUG
SEALS
15-31