Honda GL1800 Service Manual page 469

Hide thumbs Also See for GL1800:

Table of Contents

REAR WHEEL/SUSPENSION

Remove the joint boot.

Check the joint boot for tears or other damage and

replace it if necessary.

Remove the drive shaft from the swingarm.

Remove the shock arm-to-swingarm nut and bolt

and shock arm from the swingarm.

Remove the tapered roller bearings from the swing-

Both bearings,

outer races and

grease holders

Check the bearings and dust seals for damage or

must be replaced

as a set if any part

Check the outer races for damage or wear.

is damaged or

deformation.

Troubleshooting