GEARSHIFT LINKAGE/TRANSMISSION
GEARSHIFT SPINDLE:
Remove the following:
– bolt and lock washer (straighten washer tabs)
– gearshift spindle B
– thrust washer
– spindle arm
– gearshift spindle A
– oil seal
PINDLE A
INSPECTION
Check the gearshift spindles for bends.
Check the spindle arm and spindle plates for wear
PL TE
or damage.
RM
Check the spindle return spring for fatigue or
damage.
PL TE
SPRING
Check the shift fork guide pins for abnormal wear or
damage.
Measure the shift fork I.D.
SERVICE LIMIT: 14.04 mm (0.553 in)
Measure the shift fork claw thickness.
SERVICE LIMIT: 5.6 mm (0.22 in)
10-29