Clutch Slave Cylinder Inspection; Clutch Slave Cylinder Assembly - Honda GL1800 Service Manual

Hide thumbs Also See for GL1800:

Table of Contents

If piston removal is hard, place a shop towel over

Do not use high

the piston, position the cylinder body with the pis-

pressure air or bring

ton down and apply small squirts of air pressure to

the nozzle too close

the fluid inlet.

to the inlet.

Remove the spring, piston seal and oil seal from the

Check the piston spring for fatigue or damage.

Check the slave cylinder and piston for scoring or

Check the clutch lifter rod for bends or damage.

Apply a small amount of silicone grease to the lifter

rod contacting area of the piston.

Apply grease to the lips of a new oil seal and install

it into the piston.

Install a new piston seal into the piston groove.

Install the piston spring onto the piston.

Coat the piston and piston seal with clutch fluid and

install the piston and spring into the slave cylinder.

Troubleshooting