Dns Domain - H3C s3100 series Command Manual

Parameters
None
Description
Use the display ip host command to display mappings between host names and IP addresses in the
static DNS database.
Examples
# Display mappings between host names and IP addresses in the static DNS database.
<Sysname> display ip host
Host
host.com
Table 1-4 Description on the fields of the display ip host command
Field
Host
Age
Flags
Address

dns domain

Syntax
dns domain domain-name
undo dns domain [ domain-name ]
View
System view
Parameters
domain-name: DNS suffix, a string of 1 to 60 characters which can be letters, numbers, hyphens (-),
underscores (_), and dots (.).
Description
Use the dns domain command to configure a DNS suffix. The system can automatically add the suffix
to part of the domain name you entered for resolution.
Use the undo dns domain command to delete the configured DNS suffix.
No DNS suffix is configured by default.
You can configure a maximum of 10 DNS suffixes. You must enter the DNS suffix before deleting it.
Otherwise, all configured DNS suffixes are deleted.
Age
0
Host name
Time to live. 0 means that a static entry is never outdated.
You can only manually remove the mappings between host names and IP
addresses.
Indicates the type of mappings between host names and IP addresses, static or
dynamic
Static indicates static mapping between host names and IP addresses
IP address of a host
Flags Address
static 192.168.0.38
Description
1-4