H3C s3100 series Command Manual page 1073

Field
System name
System description
System capabilities supported
System capabilities enabled
PoE device type
MED information
Device class
HardwareRev
FirmwareRev
SoftwareRev
SerialNum
Manufacturer name
Model name
Asset tracking identifier
LLDP local-information of port 1
Port ID subtype
Port ID
Port description
Management address type
Management address
Management address interface type
Management address interface ID
Management address OID
Port VLAN ID(PVID)
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN supported
Port and protocol VLAN enabled
Description
System name
System description
Supported capabilities, which can be:
Bridge, indicating switching
Currently enabled capabilities, which can be:
Bridge, indicating switching is currently enabled
PoE device type
MED information
Device type, which can be:
Connectivity device, indicating an intermediate device.
Class I, indicating a normal terminal device. All terminal
devices that are LLDP-enabled are of this type.
Class II, indicating a media terminal device. A device of
this type is media-capable. That is, besides the
capabilities of a normal terminal device, it also supports
media streams.
Class III indicating a communication terminal device. A
device of this type supports IP communication systems
of end user. A device of this type supports all the
capabilities of a normal terminal device and a media
terminal device and can be used directly by end users.
Hardware version
Firmware version
Software version
Serial number
Device manufacturer
Device model
Asset tracking ID
LLDP information to be sent out port 1
Port ID type, which can be MAC address or interface name
Port ID, the value of which depends on the port ID type
Port description
Management address type
Management address
Type of the interface identified by the management address
ID of the interface identified by the management address
Management address object ID
Port VLAN ID
Port protocol VLAN ID
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
1-3