H3C s3100 series Command Manual page 1090

Description
Use the lldp notification remote-change enable command to enable trap for a port or all the ports in a
port group.
Use the undo lldp notification remote-change enable command to restore the default.
By default, trap is disabled on a port.
Examples
# Enable LLDP trap for Ethernet1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] lldp notification remote-change enable
lldp timer notification-interval
Syntax
lldp timer notification-interval interval
undo lldp timer notification-interval
View
System view
Parameters
interval: Interval to send LLDP trap messages, in the range 5 to 3600 (in seconds).
Description
Use the lldp timer notification-interval command to set the interval to send LLDP trap messages.
Use the undo lldp timer notification-interval command to restore the default.
By default, the interval to send LLDP trap messages is 5 seconds.
Examples
# Set the interval to send LLDP trap messages to 8 seconds.
<Sysname> system-view
[Sysname] lldp timer notification-interval 8
lldp timer reinit-delay
Syntax
lldp timer reinit-delay delay
undo lldp timer reinit-delay
View
System view
Parameters
delay: Initialization delay period to be set, in the range 1 to 10 (in seconds).
1-20