Rear Wheel - Honda NC700XA Service Manual

dummyhead dummyhead
REAR WHEEL/SUSPENSION

REAR WHEEL

REMOVAL
Support the motorcycle using a safety stand or hoist,
raise the rear wheel off the ground.
Remove the bolts [1] and rear wheel speed sensor [2].
NC700XA/XD/SA/
SD:
Loosen the lock nut [1], drive chain adjusting nut [2] and
axle nut [3].
Push the rear wheel forward.
Derail the drive chain [4] from the driven sprocket.
Remove the axle nut, washer [5] and adjusting plate [6].
Remove the axle [7], adjusting plate and rear wheel.
Do not operate the
brake pedal after
removing the rear
wheel.
Remove the side collars [1].
18-6
NC700XA/XD/SA/SD:
[2]
[1]
[4] [1]
[1]
[2] [3]
[5] [6] [7]